Formamide puriss. p.a., ACS reagent, =99.5% (GC/T)

Name: Formamide
Synonymns: Amide C₁; Formic amide
Description: Puriss. p.a., ACS Reagent, ≥99.5% (GC/T)

Container Type: Glass Bottle

Molar Mass: 45.04 g/mol

Empirical Formula: CH₃NO
Linear Formula: HCONH₂

CAS Number: 75-12-7
Bielstein Registry Number: 505995
EC Number: 200-842-0
MDL Number: MFCD00007941
RTECS Number: LQ0525000
UNSPSC Code: 12352111

SPECIFICATIONS

Assay (excluding N): 99.5 - 100.5 %
Assay (GC): min. 99.5 %
Density (D 20/4): 1.131 - 1.134
Refractive index: 1.446 - 1.448
Solidification Point: 2.0 - 3.0 °C
pH (5 %, 20°C): 7 - 9
Water (Karl Fischer): max. 0.1 %
IR spectrum: complying
Free acid (as HCOOH): max. 0.02 %
Mixable with H₂O: complying
Mixable with ethanol: complying
Calcium (Ca): max. 5 ppm
Cadmium (Cd): max. 1 ppm
Cobalt (Co): max. 1 ppm
Chromium (Cr): max. 1 ppm
Copper (Cu): max. 1 ppm
Iron (Fe): max. 2 ppm
Potassium (K): max. 20 ppm
Magnesium (Mg): max. 1 ppm
Manganese (Mn): max. 1 ppm
Sodium (Na): max. 20 ppm
Nickel (Ni): max. 1 ppm
Lead (Pb): max. 1 ppm
Zinc (Zn): max. 1 ppm
APHA: max. 10



PHYSICAL PROPERTIES

Vapor Density: 1.55 (vs air)
Autoignition Temperature: 932 °F
Transition Temp: transition temp 2.0-3.0 °C
Vapor Pressure: 0.08 mmHg ( 20 °C)
Boiling Point: 210 °C
Freezing Point: 1 - 3 °C
Density: 1.133 g/cm3



SAFETY INFORMATION

Flashpoint: 175 °C
Signal Word: Danger

GHS Classification:
Health hazard (GHS08)

Hazard Statement(s):
Suspected of causing cancer (H351)
May damage fertility or the unborn child (H360)
May cause damage to organs through prolonged or repeated exposure (H373)

Precautionary Statement(s):
Obtain special instructions before use (P201)
Do not handle until all safety precautions have been read and understood (P202)
Do not breathe dust/fume/gas/mist/vapours/spray (P260)
Use personal protective equipment as required (P281)

Certificate of Analysis Search
Safety Data Sheet Search
Certificate of Origin Search