N,N-Dimethylformamide, B&J Brand™, for HPLC, GC and spectrop

Name: N,N-Dimethylformamide
Synonymn: DMF, Dimethyl Formamide
Description: B&J Brand™, for HPLC, GC and spectrophotometry, >99.9%

Container Type: Glass Bottle

Molar Mass: 73.10 g/mol

CAS Number: 68-12-2

SPECIFICATIONS

GC Analysis: 99.9 % min.
GC Impurities Eluting Before Solvent: 0.5 mg/L max.
UV Absorbance @ 275 nm: 0.3 AU max.
UV Absorbance @ 300 nm: 0.05 AU max.
UV Absorbance @ 350 nm: 0.005 AU max.
UV Absorbance @ 400 nm: 0.005 AU max.
UV Cutoff: 268 nm max.
Water by Karl Fischer Titration: 0.03 % max.



PHYSICAL PROPERTIES

Viscosity (cP) at 20°C: 0.92
Refractive Index at 20°C: 1.4305
UV Cutoff (nm): 268
Elutropic Value, C-18: 7.6
Polarity Index, P': 6.4
Solubility in Water (%) at 20°C: Miscible
Surface Tension (dyn/cm) at 20°C: 36.76
Vapor Pressure (Torr) at 20°C: 2.7
Boiling Point: 153 °C
Freezing Point: -60.4 °C
Density: 0.949 g/cm3



SAFETY INFORMATION

Flashpoint: 58 °C
Hazard Class: 3
Package Group: III
UN ID: 2265
Signal Word: Danger

GHS Classification:
Flammable (GHS02)
Health hazard (GHS08)
Harmful (GHS07)

Hazard Statement(s):
Flammable liquid and vapour (H226)
Causes serious eye irritation (H319)
Harmful if inhaled (H332)
May cause cancer (H350)
May damage fertility or the unborn child (H360)

Precautionary Statement(s):
Wear protective gloves/protective clothing/eye protection/face protection (P280)
Use only outdoors or in a well-ventilated area (P271)
Wash thoroughly after handling (P264)
Avoid breathing dust/fume/gas/mist/vapours/spray (P261)
Take precautionary measures against static discharge (P243)
Use only non-sparking tools (P242)
Use explosion-proof electrical/ventilating/lighting/.../equipment (P241)
Ground/bond container and receiving equipment (P240)
Keep container tightly closed (P233)
Keep away from heat/sparks/open flames/hot surfaces - No smoking (P210)
Do not handle until all safety precautions have been read and understood (P202)
Obtain special instructions before use (P201)